 
|
PA12 Evonik Degussa E58-S4, chemical resistant, high elasticity, low-temperature resistant, UV resistant, injection molding grade.
تفاصيل المنتج:
| مكان المنشأ: | اليابان |
| إصدار الشهادات: | MSDS |
| رقم الموديل: | PA12 E58-S4 |
شروط الدفع والشحن:
| الحد الأدنى لكمية: | 25 كجم |
|---|---|
| الأسعار: | USD3.2-3.6KG |
| تفاصيل التغليف: | PE بلاستيك/كيس ورقي |
| وقت التسليم: | 7-15 أيام |
| شروط الدفع: | ر/ر |
| القدرة على العرض: | 500 ت |
|
معلومات تفصيلية |
|||
| مادة: | PA12 E58-S4 | لون: | اللون الطبيعي |
|---|---|---|---|
| طلب: | التطبيقات الإلكترونية والكهربائية | شكل: | الكريات |
| طَرد: | حقيبة 25 كجم PE | موعد التسليم: | 7-15 أيام |
| مو: | 25 كجم | درجة حرارة التصميم التلقائي: | غير متوفر |
| رائحة: | عديم الرائحة | نقطة الوميض: | لا ينطبق |
| صيغة كيميائية: | C12H22N2O2 | كثافة: | 1.01 جم/سم3 |
| الوزن الجزيئي: | 226.31 جم/مول | قابلية ذوبان المياه: | غير متوفر |
| كثافة بخار: | غير متوفر | الذوبان في الماء: | غير قابل للذوبان |
| إبراز: | chemical resistant PA12 plastic,high elasticity polyamide PA12,UV resistant injection molding PA12,high elasticity polyamide PA12,UV resistant injection molding PA12 |
||
منتوج وصف
Products Description
|
|
PA12 Evonik Degussa LX9102, Germany, low coefficient of friction, high impact resistance, high ESCR, conductive grade
|
| Physical property | Standard | Value | Unit | |
|
Density Shrinkage Flow 30x100x3mm |
SO 1183 INTERNAL METHOD |
1.02 0.9 |
g/cm³ % | |
| Shrinkage xFlow 30x100x3mm | NTERNAL METHOD | 0.9 | % | |
| Water Absorption 23℃50RH | NTERNAL METHOD | 0.7 | % | |
| Hardness | Standard | Value | Unit | |
| Rockwell Hardness R(Scale) Mechanical behavior |
ISO 2039 Standard |
105 Value |
Unit | |
| Tensile Modulus | ISO 527 | 1.5 | GPa | |
| Tensile Strength Yield | ISO 527 | 47 | MPa | |
| Elongation Break | ISO 527 | 50 | % | |
| Flexural Strength | SO 178 | 60 | MPa | |
| Flexural Modulus | ISO178 | 1.5 | GPa | |
| Charpy Notch Impact leA | ISO179 | 3 | kJ/m² | |
| Thermal | Standard | Value | Unit | |
| HDT 0.45MPa | SO 75 | 95 | ℃ | |
| HDT 1.8MPa | SO 75 | 45 | ℃ | |
| Melting Temperature CLE | ISO 11357 SO 11359 | 175-181 1.3E-4 |
℃ cm/cm/℃ |
|
| Electrical properties | Standard | Value | Unit | |
| Volume Resistivity | IS K6911 | 1E15 | Q.cm | |
| Fammability | Standard | Value | Unit | |
| Hlame Rating NC1.5mm | UL94 | HB | ||
| UL | Standard | Value | Unit | |
| UL FlameRating NC1.5mm RTI Elec NC1.5mm |
UL94 UL746B |
HB 65 |
℃ |
Application
 |
|
|
Optical lighting
It used to manufacture large lampshade, protective glass, left and right eyepiece tubes of Optical instrument, etc., and can also be widely used as transparent materials on aircraft. |
Electronic appliances
It used in the manufacturing of insulation connectors, coil frames, sockets, insulation sleeves, telephone shells and parts, and battery shells for mining lamps, and so on. |
Mechanical equipment
It used for manufacturing various gears, racks, worm gears, worms, bearings, cams, bolts, levers, crankshafts, ratchets, and can also be used as mechanical components such as shields |
Physical Property Parameter
Company Profile:
Dongguan Pengchen plastic Co., LTD Was Established On November 15, 2022, Located Indongguan City.
|
|
Warehouse:
|
|
|
|
| Application | Electronics electrical appliances mobile phones cars |
| Grade | Injection Grade,Extrusion Grade |
| OEM/ODM | Accepted |